Most painter’s tapes are designed to be relatively gentle – especially in comparison to more robust tapes like duct tapes – but not all of them are equal when it comes to their effect on certain surfaces. Delicate surface painter’s tapes are those which are built for...
Masking tape is used for many different jobs – painting, color coding or labeling, bundling, or temporary repairs – and each job demands different performance characteristics from the tape to successfully accomplish its task. While paint masking tape almost always...
The surface that you are painting on should be a major consideration when selecting the type of painter’s tape. Different tapes are constructed with different levels of adhesion, making it important to choose one that is strong enough to hold up on the surface you...
Many new paints are being designed with lower or zero volatile organic compounds (VOCs) compared to traditional paints due to a growing demand for non-toxic paint products. While this may be a good thing, DIY painters and contractors have encountered a challenge with...
Yes, given its light adhesion, you can apply painter’s tape to windows. In order to mask windows, start at any corner of the trim, and stick your painter's tape on the trim where it meets the wall. Apply your tape in 4- or 5-foot segments in order to prevent the tape...
Painting a room usually starts with the ceiling, but if you aren’t painting the walls, you should drape them using the process we discussed in “how do I protect walls”. The wall may get a few splatters of unwanted paint, but any blemishes should be able to be removed...
In order to protect your floors from spatters and stains, place a protective plastic sheet over the whole surface, covering the floor - corner to corner. If the baseboards don’t need masking, simply tape the edges of the plastic to the floor. If you need to mask...
Protecting surfaces during a paint project can be accomplished by masking them off. It is vital to take your time during this process, to ensure that all your masked-off areas are leak-free. Read on to learn how to protect various surfaces during your next paint...
To apply painter's tape in corners, start by running the first piece of tape along the baseboard of the wall, through the corner, and up the perpendicular wall. Burnish the tape firmly with a putty knife, then cut along the crease with a sharp utility knife, thus...
When it comes to paint projects, it is best to apply and remove painter's tape in a fairly short time span. However, there are some paint masking tapes that are designed to adhere to surfaces for longer - 3, 8, 21, even 60 days depending on the project and surface. Be...
No, in fact it is best if the tape is removed from the painted surface before it has dried. This prevents the paint and the tape from bonding, which can result in a jagged edge when the tape is removed, taking pieces of paint with it. If your paint has dried...
Ensure clean, sharp paint lines by following these simple application and removal steps: Start by making sure your surfaces are dust and debris-free, these particles can prevent a tape from bonding properly with the surface, resulting in messy paint lines. Next, keep...
Room preparation is a key step in the painting process, though it is often overlooked for various reasons. To ensure that no furniture or other materials are damaged while painting a room, clear away any clutter, electric sockets and light covers, furniture, or...